Used in natural gas supply networks with service connection pressure of 35 mbar\u20135 bar. Equipped with a tapping system, and coupling can be performed whether the network is pressurized or not. The service tees are factory-fitted, on the outlet of the service tee, with the gas stop device, a safety device designed to prevent explosions, personal injury, gas losses, etc. in the event of accidental breakage of the service connection pipe. The safety devices are non-self-resetting; to unblock them, special reset kits are required, available from Distrigaz Sud\/ENGIE teams.
\n-Material: PE 100 SDR 11 (ISO S5)
\n-Manufacturing standard: EN 1555-1:2011, ISO 4437-3
\n-Manufacturing method: injection molding
\n-The strength of the electrofusion fitting is embedded in the material
\n-The inner surfaces of the fittings are smooth, without grooves
\n-Welding temperature between -10\u00b0C and +45\u00b0C
\n-Welding voltage 40 V
\n-With integrated drill for tapping pressurized pipes
\n-4 mm connectors
\n-Weld indicators with limited travel
\n-Electrofusion service tees = d250 mm are supplied with a fixing clamp, fastened at one end and with the tightening system at the other end. For installation, no special devices are required; a socket wrench is sufficient. Installation must be carried out according to the installation instructions by authorized personnel. <\/p>\n","protected":false},"excerpt":{"rendered":"
Used in natural gas supply networks with service connection pressure of 35 mbar\u20135 bar. Equipped with a tapping system, and coupling can be performed whether the network is pressurized or not. The service tees are factory-fitted, on the outlet of the service tee, with the gas stop device, a safety device designed to prevent explosions, personal injury, gas losses, etc. in the event of accidental breakage of the service connection pipe. The safety devices are non-self-resetting; to unblock them, special reset kits are required, available from Distrigaz Sud\/ENGIE teams.
\n-Material: PE 100 SDR 11 (ISO S5)
\n-Manufacturing standard: EN 1555-1:2011, ISO 4437-3
\n-Manufacturing method: injection molding
\n-The strength of the electrofusion fitting is embedded in the material
\n-The inner surfaces of the fittings are smooth, without grooves
\n-Welding temperature between -10\u00b0C and +45\u00b0C
\n-Welding voltage 40 V
\n-With integrated drill for tapping pressurized pipes
\n-4 mm connectors
\n-Weld indicators with limited travel
\n-Electrofusion service tees = d250 mm are supplied with a fixing clamp, fastened at one end and with the tightening system at the other end. For installation, no special devices are required; a socket wrench is sufficient. Installation must be carried out according to the installation instructions by authorized personnel. <\/p>\n","protected":false},"featured_media":120584,"template":"","meta":{"inline_featured_image":false,"wds_primary_product_brand":0,"wds_primary_product_cat":0},"product_brand":[],"product_cat":[8482],"product_tag":[],"class_list":{"0":"post-134332","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-fitinguri-gaz","8":"first","9":"instock","10":"shipping-taxable","11":"product-type-simple"},"yoast_head":"\n