Ecos 160 is a butt fusion welding machine for PE, PP, PB and PVDF pipes and
fittings with diameters between 40 and 160,
for workshops or trenches.
Manually controlled hydraulic unit. Temperature controller
integrated in the heater plate handle. Requires separate power supply for
each component (hydraulic unit, facer, heater plate). Voltage/power:
230V/1900W
BASE MACHINE (Frame):
-Latest-generation design, with a robust frame resistant
to bending
-Good accessibility thanks to the 35° tilt
-Sliding clamp no. 3 allows clamping and welding of elbows and
tees without other tools
-The clamping jaws are mounted on the top and can be folded down.
If necessary, the four clamping jaws can be removed
quickly
-Simultaneous removal mechanism for the heater plate from the
joint surfaces to optimize the welding process
Weight: ECOS 160 = 22 kg
HYDRAULIC UNIT
-Compact design with protective frame
-Valve for precise, fine adjustment of hydraulic pressure
-Joystick control of the clamping jaws
-Precision pressure gauge with vibration protection and easy-to-read scale
Hydraulic accumulator for equalization pressure during the cooling phase
cooling
-Integrated interface for the WR200 S ECO welding data logger
-Max. operating pressure: ECOS 160 = 100 bar
-Weight: 22 kg
FREZA
-Facing device for one or both facing surfaces
-Carrying handle, ergonomically positioned to counterbalance
the facer weight
-Self-locking mechanism in working position
-Safety microswitch to prevent unintended start-up
Weight: ECOS 160 = 7 kg,
HEATER PLATE
-High-performance heating element with electronic control of
temperature
-High-quality PTFE non-stick coating with long
service life
-Temperature indicator located in the handle
Weight: ECOS 160 = 5.5 kg,
Power supply: 230V/ ECOS 160 = 1200 W,
STAND
-For safe storage of the facer and heater plate
-Weight: ECOS 160 = 4.8 kg,
The machine is delivered on a pallet and in a cardboard box to protect the
components during transport.
According to regulations, inspection is required at 1 year.
Welding machines allow recording and printing of welding protocols only when
equipped with the WR 200 S ECO data logger
(code 53512000250), supplied on request.
Reducers are supplied on request. The reducer set includes 4 reducers
wide and 4 narrow reducers for each size,
cast in aluminum. The wide reducers also serve to re-round
the ends of ovalized pipes.