These elbows are manufactured from black PE100 high-density polyethylene compound. The PE100 compound is a homogeneous mixture of polyethylene, antioxidants, pigments, and UV radiation stabilizers. The PE100 raw material complies with SR ISO 4427-1 and SR EN 12201-1 standards. Manufacturing: Injection molded fittings. Reference standard: SR EN 12201-3: Plastic piping systems for water supply, service connections, and pressure drainage systems – Polyethylene (PE) – Part 3: Fittings. Intended for use in potable water supply networks with an operating pressure of PN 10 bar, installed underground. The service life is 50 years, corresponding to an operating temperature of 20°C and a working pressure equal to or less than the PN for which the fitting was manufactured. Joining method: – By butt welding with fittings/pipes of the same SDR. – By electrofusion.
90° ELBOW PE100 WATER/GAS VALWater D.280 SDR17 INJECTED TG
The elbows are manufactured from black high-density polyethylene PE100 compound. The PE100 compound is a homogeneous mixture of polyethylene, antioxidants, pigments, and UV radiation stabilizers. The PE100 raw material complies with SR ISO 4427-1 and SR EN 12201-1 standards. Manufacturing: Injected fittings. Reference standard SR EN 12201-3: Plastic piping systems for water supply, service connections, and pressure drainage systems - Polyethylene (PE). Part 3: Fittings. For use in potable water supply networks with an operating pressure of PN 10 bar, installed underground. The service life is 50 years, corresponding to an operating temperature of 20°C and a working pressure equal to or less than the PN for which the fitting was manufactured. Joining method: - By butt welding with fittings/pipes of the same SDR. - By electrofusion.
| Material | PE100 |
|---|---|
| Subclasa | HDPE WATER FITTINGS |
| Tip articol | TOC |
| UM colete | PIECE |
| Cod CPV | CPV 44167000-8 |
| Cantitate colet | 1 |
| SDR | 17 |
| Unghi | 90 Grade |
| Diametru | 280 |
| Diametru(mm) | |
| Cod vamal | 39174000 |
