Stub flanges are manufactured from black PE100 high-density polyethylene compound. The PE100 compound is a homogeneous mixture of polyethylene, antioxidants, pigments, and UV radiation stabilizers. The PE100 raw material complies with SR ISO 4427-1 and SR EN 12201-1 standards. Manufacturing: Injection molded fittings. Reference standard SR EN 12201-3: Plastic piping systems for water supply, service connections, and polyethylene (PE) pressure discharge systems. Part 3: Fittings. For use in potable water supply networks with an operating pressure of PN 16 bar, installed underground. The service life is 50 years, corresponding to an operating temperature of 20°C and a working pressure equal to or less than the PN for which the fitting was manufactured. Connection method: Butt welding with fittings/pipes of the same SDR.
SHORT FLANGE END PE100 D.500 SDR11 INJECTED
Flange ends are produced from black PE100 type high-density polyethylene compound. The PE100 compound is a homogeneous mixture of polyethylene, antioxidants, pigments, and UV radiation stabilizers. The PE100 raw material complies with SR ISO 4427-1 and SR EN 12201-1 standards. Manufacturing: Injected fittings. Reference standard SR EN 12201-3: Plastics piping systems for water supply, service lines and pressure drainage systems - Polyethylene (PE). Part 3: Fittings. Use in drinking water supply networks with operating pressure PN 16bar, installed buried in the ground. Service life is 50 years, corresponding to an operating temperature of 20°C and a working pressure equal to or less than the PN for which the fitting was manufactured. Joining method - by butt fusion welding with fittings/pipes of the same SDR.
| Material | PE100 |
|---|---|
| Subclasa | HDPE WATER FITTINGS |
| UM colete | PIECE |
| Tip articol | FLANGE END |
| Cod CPV | CPV 44167000-8 |
| Cantitate colet | 1 |
| SDR | 11 |
| Diametru | 500 |
| Diametru(mm) | |
| Cod vamal | 39174000 |
