Flange stub ends are produced from high-density
polyethylene compound, type PE100, in black. The PE100 compound
is a homogeneous mixture of polyethylene, antioxidants, pigments, and
stabilizers against UV radiation.
The PE100 raw material complies with SR ISO 4427-1
and SR EN 12201-1 standards.
Manufacturing
Injection molded fittings.
Reference Standard
SR EN 12201-3: Plastic piping systems for
water supply, service connections, and pressure drainage systems –
Polyethylene (PE). Part 3: Fittings.
Usage
In potable water supply networks with an operating pressure of PN
16 bar, installed underground.
The service life is 50 years, corresponding to an operating temperature of
20 °C and a working pressure equal to or less
than the PN for which the fitting was manufactured.
Joining Method
– By butt welding with fittings/pipes of the same SDR.
SHORT FLANGE STUB END PE100 D.315 SDR7.4 PN25 INJECTION MOLDED
Flange stub ends are produced from high-density polyethylene compound, type PE100, in black. The PE100 compound is a homogeneous mixture of polyethylene, antioxidants, pigments, and stabilizers against UV radiation. The PE100 raw material complies with SR ISO 4427-1 and SR EN 12201-1 standards. Manufacturing: Injection molded fittings. Reference Standard: SR EN 12201-3: Plastic piping systems for water supply, service connections, and pressure drainage systems - Polyethylene (PE). Part 3: Fittings. Usage: In potable water supply networks with an operating pressure of PN16 bar, installed underground. The service life is 50 years, corresponding to an operating temperature of 20 °C and a working pressure equal to or less than the PN for which the fitting was manufactured. Joining Method: - By butt welding with fittings/pipes of the same SDR.
| Material | PE100 |
|---|---|
| Subclasa | HDPE WATER FITTINGS |
| UM colete | PIECE |
| Tip articol | FLANGE END |
| Cod CPV | CPV 44167000-8 |
| Cantitate colet | 1 |
| SDR | 7,4 |
| Diametru | 315 |
| Diametru(mm) | |
| Cod vamal | 39174000 |
