Treats water for iron, manganese, hardness, ammonium and organic matter. Operating parameters: Pressure: 2 – 6 bar Water temperature: +4..+30°C Ambient temperature: +5..+40°C Relative humidity: max 80% Pre-filtration degree: 100 µm Connection: 1″ Voltage: 230V, 50 Hz Power: 3 W Feed water parameters: For proper operation of the stations, water quality at the inlet must be controlled in terms of: Hardness: 42 dH Maximum iron: 15 mg/l Maximum manganese: 3mg/l Maximum oxidability: 4 ppm O2 Maximum ammonium: 4 mg/l Total dissolved solids: 4000 mg/l Advantages: One solution for 5 problems: eliminates the risk of red and black stains on sanitary fixtures caused by iron and manganese content. eliminates the risk of limescale deposits. provides control over ammonium and organic matter content. saves space by installing only one unit for all 5 problems. benefits from the quality of professional Ecomix filter media. Attention! The station requires connection to sewerage. Designed to be installed in enclosures protected from frost and excessive temperatures. To be used ONLY for cold water supply circuits. Where water is microbiologically unsafe or where water quality is unknown, water analysis and disinfection of the installation and water source are required. In this situation, contacting a specialist is recommended.