Treats water in terms of iron, manganese, hardness, ammonium, and organic matter.
Operating parameters:
Pressure: 2–6 bar
Water temperature: +4…+30°C
Ambient temperature: +5…+40°C
Relative humidity: max. 80%
Prefiltration grade: 100 m
Connection: 1″
Voltage: 230 V, 50 Hz
Power: 3 W
Feed water parameters:
For proper operation of the stations, the water quality at the inlet must be checked for:
Hardness: 42 °dH
Max. iron: 15 mg/L
Max. manganese: 3 mg/L
Max. oxidizability: 4 ppm O2
Max. ammonium: 4 mg/L
Total dissolved solids: 4,000 mg/L
Advantages: the only solution for 5 issues:
– eliminates the risk of red and black stains on sanitary ware caused by iron and manganese content;
– eliminates the risk of limescale deposits;
– provides control over ammonium and organic matter content;
– saves space by installing just one unit for all 5 issues;
– benefits from the quality of the professional Ecomix filter media.
Attention! The station requires connection to the sewer.
Designed to be installed in areas protected from frost and excessive temperatures.
To be used ONLY for cold-water supply circuits.
Where the water is microbiologically unsafe or where water quality is unknown, a water analysis is required, as well as disinfection of the installation and the water source. In this situation, contacting a specialist is recommended.