Single-layer pipe, made of high-density polyethylene, used in:
– Domestic wastewater drainage systems (intermittent +95°C, continuous +80°C) and gravity stormwater drainage within tall buildings,
public buildings, and industrial halls.
– Ventilation stacks for drainage systems.
– Domestic wastewater drainage systems (intermittent +95°C, continuous +80°C) and gravity stormwater drainage installed underground –
PE100 pipes and fittings range – SDR26 (S12.5)
– Vacuum stormwater drainage systems, made of (electro)welded PE100 pipes and fittings.
Characteristics
-Diameter range: Ø32, Ø40, Ø50, Ø56, Ø63, Ø75, Ø90, Ø110, Ø125, Ø160, Ø200, Ø250, Ø315.
-Compliance: EN 1519.
-Series: S12.5 for SDR26 and S16 for SDR33.
-Application classes:
-B – intended for use inside and outside buildings, wall-mounted.
-BD – intended for use inside buildings or buried underground within the building’s perimeter (at a maximum distance of 1m
from it and connected to the building’s drainage system). For this application, only pipes with
diameters equal to or greater than 75mm belonging to the S12.5 series are permitted.
-Material: High-density polyethylene.
-Type: Single-layer
-Maximum operating temperature: +95°C, intermittently.
-Color: Black
-Joining methods:
-Butt welding and electrofusion socket: PE100 SDR26 for 5 bar/-800 mbar and for PE100 SDR33 for 4 bar/-450 mbar in
fluid conditions at +20°C and a safety factor of 1.25.
-Socket and gasket joint, expansion sleeve – maximum 0.5 bar.
-Mechanical flange joint.
-Mechanical joint with threaded fittings.