Reduced tees are produced from black PE100 high-density polyethylene compound. The PE100 compound is a homogeneous mixture of polyethylene, antioxidants, pigments, and UV radiation stabilizers. The PE100 raw material complies with SR ISO 4427-1 and SR EN 12201-1 standards. Manufacturing: Reduced tees are composed of segmented tees to which one or more reductions have been welded. Reference standard SR EN 12201-3: Plastic piping systems for water supply, connections, and pressurized drainage systems – Polyethylene (PE). Part 3: Fittings. Usage in potable water supply networks with an operating pressure of PN 8 bar, installed underground. The service life is 50 years, corresponding to an operating temperature of 20°C and a working pressure equal to or less than the PN for which the fitting was manufactured. Joining method: – By butt welding with fittings/pipes of the same SDR. – By electrofusion. Approvals: Approval and technical agreement for use in construction in Romania. Sanitary approval for use with potable water, issued by INSP Bucharest.
Reduced Tee PE100 VALWater D225/110 SDR17, Welded
SDR 17 polyethylene tees, manufactured by welding PE100 SDR 17 pipe segments, are utilized in pressurized water supply networks (including potable water) with a maximum pressure of PN 8 bar (calculated for 20°C).
Fittings are verified according to EN12201-3: Plastic piping systems for water supply and for connections and pressurized drainage systems. Polyethylene (PE). Part 3: Fittings. Table B.1 Annex B.
Fittings are verified according to EN12201-3: Plastic piping systems for water supply and for connections and pressurized drainage systems. Polyethylene (PE). Part 3: Fittings. Table B.1 Annex B.
| Material | PE100 |
|---|---|
| UM colete | PIECE |
| Ambalare | NEAMBALAT |
| Tip articol | TEE |
| Cantitate colet | 1 |
| SDR | 17 |
| Perioada garantie | 24 Months |
| Durata estimata de viata | 50 Years |
| Diametru | 225/110 |
| Cod vamal | 39174000 |
| Subclasa | HDPE WATER FITTINGS |
