Flanged ends are manufactured from high-density polyethylene compound type PE100, black color. PE100 compound is a homogeneous mixture of polyethylene, antioxidants, pigments and UV radiation stabilizers. PE100 raw material complies with standards SR ISO 4427-1 and SR EN 12201-1. Manufacturing: Injection molded fittings. Reference standard SR EN 12201-3: Plastics piping systems for water supply, service lines and pressure drainage systems – polyethylene (PE). Part 3: Fittings. Use in drinking water supply networks with operating pressure PN 10 bar, installed buried in the ground. Service life is 50 years, corresponding to an operating temperature of 20°C and a working pressure equal to or less than the PN for which the fitting was manufactured. Joining method – by butt fusion welding with fittings/pipes with the same SDR.
SHORT FLANGE END PE100 D.400 SDR17 INJECTED
Flange ends are made from black, high-density polyethylene compound, PE100 type. PE100 compound is a homogeneous blend of polyethylene, antioxidants, pigments, and UV radiation stabilizers. The PE100 raw material complies with SR ISO 4427-1 and SR EN 12201-1. Manufacturing: injection-molded fittings. Reference standard SR EN 12201-3: Plastic piping systems for water supply, service connections, and pressurized drainage and sewerage systems — Polyethylene (PE). Part 3: Fittings. Use in drinking water supply networks with an operating pressure of PN 10 bar, installed buried in the ground. Service life is 50 years, corresponding to a service temperature of 20°C and a working pressure equal to or lower than the PN for which the fitting was manufactured. Jointing method: butt fusion welding with fittings/pipes with the same SDR.
| Material | PE100 |
|---|---|
| UM colete | PIECE |
| Tip articol | FLANGE END |
| Cod CPV | CPV 44167000-8 |
| Cantitate colet | 1 |
| SDR | 17 |
| Diametru | 400 |
| Diametru(mm) | |
| Cod vamal | 39174000 |
| Subclasa | HDPE WATER FITTINGS |
